How to Fix a Stuck Garage Door That Wont Open or Close Properly

112 Views  | 

วิธีแก้ปัญหาประตูโรงรถ

How to Fix a Stuck Garage Door That Won’t Open or Close Properly
Why Fixing a Stuck Garage Door Is Urgent
A garage door that gets stuck or fails to open and close properly is not only an inconvenience but also a serious security risk for homes and businesses. Leaving the issue unresolved can lead to further damage to the system and higher repair costs in the long run.


Common Causes of a Stuck or Misaligned Garage Door
1. Worn-Out Springs or Bent Tracks
Weak or broken springs prevent the door from opening fully.
Misaligned or bent tracks cause jerky movements.
2. Malfunctioning Motor or Remote Control
Dead remote batteries or signal interference.
A worn-out or failing motor.
3. Faulty Sensors
Dirty or blocked sensors.
Misaligned laser beams cause the door to refuse closing.
4. Poor Installation
Especially in the case of imported garage doors, improper installation by inexperienced technicians can cause jamming and mechanical issues.


Quick Fixes You Can Try
Check the Remote Control

Replace batteries.
Test with the wall switch to ensure the motor is functional.
Clean and Align the Sensors

Wipe the lenses with a dry cloth.
Remove obstructions and ensure proper alignment.
Inspect Tracks and Springs

Apply lubricant to hinges and tracks.
If springs are damaged, contact a professional technician.
Reset the Control System

Unplug the motor for 1–2 minutes and plug it back in.
Press the reset button as per the manual.

When to Call a Professional Technician
Broken springs or snapped cables.
Burned-out or failing motors.
Complex automation issues in imported garage doors.
Real-life experience: A factory owner in Rayong shared that after staff failed to fix the issue themselves, they finally called the importer’s service team. The technician solved the issue within an hour without replacing the entire system, saving significant costs.


Preventing Garage Door Jams in the Future
Routine maintenance every 6 months → Inspect motors, tracks, springs, and sensors.
Lubricate tracks and hinges → Prevents friction and noise.
Check electrical systems → Avoid short circuits or power drops.
Use professional installers → Especially critical for imported garage doors.

Repair and Maintenance Costs
Spring replacement: 2,000 – 5,000 THB
Motor replacement: 10,000 – 30,000 THB (depending on brand and model)
Annual maintenance: 3,000 – 8,000 THB

Trusted References
Home Depot – Garage Door Troubleshooting
Hörmann – Garage Door Maintenance
Better Homes & Gardens – Garage Door Repair Guide

Conclusion
Issues with stuck garage doors or misaligned operation can often be solved with basic checks such as inspecting remotes, sensors, and routine lubrication. However, for more complex problems like broken springs or faulty motors, professional service is highly recommended.

Tip: For imported garage doors, always rely on certified suppliers or authorized service providers to ensure the repair meets international standards.

Powered by MakeWebEasy.com
This website uses cookies for best user experience, to find out more you can go to our Privacy Policy  and  Cookies Policy